Eggtimer Quasar Support
Documents
Eggtimer Quasar Assembly Guide Rev G3-G4
Eggtimer Quasar User’s Guide Rev. 1.02S/1.02T
Eggtimer Quantum-Quasar Airstart Manual
Eggtimer Quasar G3/G4 Gerber Paste Files
Note: The Paste files include the pre-mounted GPS and baro pressure sensor, you will have to cut around those pads with an X-Acto knife before you use them.
Firmware Updates
See the Eggtimer Quasar User’s Guide for instructions on how to update the firmware.
Note: We generally do not post older versions of the firmware, unless there is an incompatibility with the currently-shipping version of the hardware. We recommend that you check our site regularly for firmware updates, and update your firmware to the latest release if applicable.
IMPORTANT NOTE: DO NOT try to perform a firmware update with any loads attached to the deployment outputs! Although the chance of them firing during an update is virtually zero, it’s very bad safety practice to have any pyrotechnic loads connected to an altimeter when the rocket is not being prepped for flight.
Eggtimer Quasar 1.02T Firmware (North American Version)
Eggtimer Quasar Release Notes Version 1.02T
70 cm Ham Version
Eggtimer Quasar 1.02T Firmware (70cm Ham Version)
Other Regions
Eggtimer Quasar 1.02T Firmware (EU/UK Version)
Eggtimer Quasar 1.02T Firmware (AUS/NZ Version)