Eggfinder TX Assembly Manual Rev D3-D4 (Pre-Mounted Quectel GPS)

Eggfinder TX Assembly Manual Rev C1  

Eggfinder TX C1 Cream Gerbers (for reflow mounting, C1 version only)

Note:  The GND pads on the GPS module are smaller than the slots, so they won’t leave any paste on the board.   Also, be VERY careful when handling the GPS module… it’s relatively heavy so the slightest bump will knock it out of alignment, and it won’t auto-align like the smaller SMT parts do.


Older Version Documentation

Eggfinder TX Assembly Guide Rev B4d