Eggtimer Rocketry
 
Purchase

OK, I'm ready to order!   Where's the PayPal Button?

We don't have one... over half of our customers ask us pre-sale questions, so we like to have a conversation with you before you order so we make sure you're getting the right products for your needs.  There's nothing more frustrating then ordering something and finding out after you start building that you needed "something else"... we want both of us to be happy!

Our order process works like this:

1) You send us an email (to sales@eggtimerrocketry.com ) telling us what you want, including your shipping address and your PayPal-linked email address.
2) If we have a question about your order, we'll let you know right away, so we can get it right.
3)  We create a PayPal invoice and send it to you.
4)  You pay the invoice in PayPal, and we ship your stuff.

Note that if we are out of stock on something and it's going to take more than a day or two to ship, we'll let you know before we send you an invoice.  We don't like to send an invoice until we know when can ship the product... it's not fair to take your money before we have something to send to you.

Prices are:

Eggtimer Classic Flight Computer Kits:
Eggtimer kit with data cable:  $40
Eggtimer kit WITHOUT data cable (for those of you who already have one):  $35
TwoFer special:  TWO Eggtimer kits with ONE data cable:  $70
Data Cable Only:  $5

Eggtimer Accessories:
Locking Header/Socket Kit, including pins:  $5 per set (RevD board only)
Locking Socket-Only Kit, including pins:  $3 per set (RevD board only)
AUX Board Kit (includes locking header/socket/pins): $7
  (Buffers two AUX outputs for high-current drive)

California Residents will be charged appropriate CA State Sales Tax 
  (Sorry, it's the CA FTB's ruling... interstate orders are not taxable)

Eggtimer orders:  Add $3.00 for US domestic shipping (USPS with tracking)
    Note:  These prices are for US orders,
                  contact us for information on international orders.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Eggtimer Quark

Eggtimer Quark Deployment Controller Kit:  $20
4-Pin Screw Terminal Block:  $1.50
Data Cable (for testing):  $5
  (It's the same one that we sell for the Eggtimer, so if you have an Eggtimer with the
     data cable already you don't need another one)


California Residents will be charged appropriate CA State Sales Tax 

  (Sorry, it's the CA FTB's ruling... interstate orders are not taxable)

Eggtimer orders:  Add $3.00 for US domestic shipping (USPS with tracking)
    Note:  These prices are for US orders,
                  contact us for information on international orders.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Eggtimer Quantum

Eggtimer Quantum Kit (includes terminal blocks):  $40
Data Cable (for software updating & viewing passkey):  $5
  (It's the same one that we sell for the Eggtimer, so if you have an Eggtimer with the
     data cable already you don't need another one)

California Residents will be charged appropriate CA State Sales Tax 

  (Sorry, it's the CA FTB's ruling... interstate orders are not taxable)

Eggtimer orders:  Add $3.00 for US domestic shipping (USPS with tracking)
    Note:  These prices are for US orders,
                  contact us for information on international orders.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Eggfinder Kits:
Eggfinder Starter Set... $90 ($95 with the Eggfinder Mini transmitter)
   Includes one Eggfinder TX kit and one Eggfinder RX ("dongle") receiver kit
        (laptop/tablet with USB port required for use with RX dongle receiver)

Eggfinder LCD Starter Set...$120 ($125 with the Eggfinder Mini transmitter)
   Includes one Eggfinder TX kit and one handheld Eggfinder LCD receiver kit

Eggfinder TX kit (transmitter) only:  $70
Eggfinder Mini transmitter kit only:  $75 (includes special stubby external antenna)
Eggfinder RX kit (USB "dongle" receiver) only: $25
Eggfinder LCD kit only (receiver with LCD display): $55
Eggfinder LCD kit WITHOUT case/battery box/hardware:  $45

OpenLog data logging module (logs GPS data to micro SD card):  $12 each
   (Fits directly on Eggfinder TX RevC1 board)
TXLog OpenLog Adapter Board for Eggfinder TX B6/B7 boards: $8 each
   (Allows you to mount an OpenLog data logger on a B6/B7 TX board)

 Optional RP-SMA edge connectors (for external antenna):  $3 each
Optional 3 dB external antenna: $10 each
   Antenna Combo:  RP-SMA + 3 dB external antenna:  $12
Data Cable (for flash-updating Eggfinder LCD):  $5
  (It's the same one that we sell for the Eggtimer, so if you have an Eggtimer with the
     data cable already you don't need another one for the Eggfinder LCD)

Note:  Eggfinder TX's, Mini's, and LCD's are shipped on 915.000 MHz by default.  You can (and should!) change them afterwards to any one of 72 frequency/ID combinations.  The Eggfinder RX receiver IS NOT frequency-programmable.  If you order an Eggfinder Starter Set with the Eggfinder RX receiver we will ship them on a random frequency NOT on 915.000 MHz.  If you order an Eggfinder RX receiver by itself, then you probably already have a frequency/ID in mind... Please specify it when you order.

International Eggfinder kits are shipped on 921.000 MHz (AUS/NZ) or 869.525 MHz (UK/EU) for compliance with local regulations.  Frequency programmmability for inernational versions is restricted to local frequency bands.

Eggfinder orders:  Add $6.00 for US domestic shipping (USPS with tracking)
   Note:  These prices are for US orders,
                contact us for information on international orders.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Eggtimer TRS Kits:
Eggtimer TRS/LCD Starter Set...$140
  Includes Eggtimer TRS and Eggtimer LCD receiver kits

Eggtimer TRS Kit Only... $90
Optional RP-SMA edge connectors (for external antenna): $3 each
Optional 3 dB external antenna (for LCD receiver):  $10 each
   Antenna Combo:  RP-SMA + external 3 dB antenna:  $12
Optional Screw-Terminal Blocks:  $3 for the set
Data Cable (for flash-updating and downloading): $5
  (It's the same one that we sell for the Eggtimer, so if you have an Eggtimer with the
     data cable already you don't need another one for the TRS)


Add $6.00 for US domestic shipping (USPS with tracking)
  Note:  These prices are for US orders,
                contact us for information on international orders

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Eggtimer WiFi Switch
Eggtimer WiFi Switch Kit:  $20
Screw Terminal Block Set (2):  $3
Data Cable (for viewing passkey and updating): $5
  (It's the same one that we sell for the Eggtimer, so if you have an Eggtimer with the
     data cable already you don't need another one for the WiFi Switch)


Add $3.00 for US domestic shipping (USPS with tracking)
  Note:  These prices are for US orders,
                 contact us for information on international orders

California Residents will be charged appropriate CA State Sales Tax
  (Sorry, it's the CA FTB's ruling... interstate orders are not taxable)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To purchase Eggtimer products, send us an email (to sales@eggtimerrocketry.com ) with the following info:

1) Your Name, Shipping Address, City, State, Zip
2) Your email address (linked to your PayPal account)
3) Quantity and product you want to buy

We'll cut a PayPal invoice and email it to you for your approval.  You simply go into your PayPal account and select Pay This Invoice, and your Eggtimer Rocketry kit(s) will be on the way.

If you don't want to go the PayPal route, we'll also take checks, money orders, and (if you REALLY have to...) cash.  Send us an email first so we can create a PayPal invoice, and we'll mark it paid and ship when your payment arrives and clears. 

Note:  Please add our email address, sales@eggtimerrocketry.com, to your "safe senders" list in your email client.  We've seen some issues with important emails getting bounced or put into Spam folders, and we want to make sure that there are no unnecessary communication delays.